SystemBlueFOX Class Reference

A class containing mvBlueFOX specific settings to control the overall behaviour of the driver(Device specific interface layout only). More...

#include <mvIMPACT_acquire.h>

Inheritance diagram for SystemBlueFOX:

Public Member Functions
HOBJ	hObj (void) const
	Returns a unique identifier for the component collection referenced by this object.
const ComponentCollection &	restoreDefault (void) const
	Restores the default for every component of this collection.
	SystemBlueFOX (Device *pDev)
	Constructs a new mvIMPACT::acquire::SystemBlueFOX object.

Public Attributes
PropertyI	acquisitionIdleTimeMax_ms
	An integer property defining the maximum time in ms the driver waits for new requests being queued until streaming by the device will automatically be stopped.
PropertyIAcquisitionMode	acquisitionMode
	An enumerated integer property defining the acquisition mode of the device.
PropertyIBoolean	featurePollingEnable
	An enumerated integer property defining whether features defining a polling time shall be updated automatically or not.
PropertyI	featurePollingInterval_ms
	An integer property defining the polling interval in ms the driver waits for each iteration before running through update loop again.
PropertyIBoolean	footerCheckEnable
	An enumerated integer property allowing to switch on/off the check of the image footer.
PropertyIBlueFOXFooterMode	footerMode
	An enumerated integer property defining the footer mode of the device.
PropertyIBoolean	genDCParserEnable
	An enumerated integer property which can be used to enable/disable automatic GenICam™ GenDC Container parsing.
PropertyI	imageProcessingMaximumThreadCount
	An integer property influencing the number of parallel threads used by the internal image processing pipeline.
PropertyIImageProcessingMode	imageProcessingMode
	An enumerated integer property influencing the behaviour of the internal image processing pipeline.
PropertyIImageProcessingOptimization	imageProcessingOptimization
	An enumerated integer property influencing the behaviour of the internal image processing algorithms.
PropertyI	methodPollingInterval_ms
	An integer property defining the polling interval in ms the driver waits during each iteration before checking a methods execution state again.
PropertyI	methodPollingMaxRetryCount
	An integer property defining the polling interval in ms the driver waits during each iteration before checking a methods execution state again.
PropertyIDevicePowerMode	powerMode
	An enumerated integer property defining the power mode of the device.
PropertyI	requestCount
	An integer property defining the number of requests allocated by the driver.
PropertyIBoolean	statusLEDEnable
	An enumerated integer property allowing to switch on/off the status LED of the device.
PropertyIBlueFOXTransferSize	transferSize
	An enumerated integer property defining the block size of the image data blocks transferred from the device.

Protected Attributes
HOBJ	m_hRoot

Detailed Description

A class containing mvBlueFOX specific settings to control the overall behaviour of the driver(Device specific interface layout only).

Note

This class will only be available if mvIMPACT::acquire::Device::interfaceLayout is set to mvIMPACT::acquire::dilDeviceSpecific before the device is opened.

Constructor & Destructor Documentation

SystemBlueFOX()

SystemBlueFOX ( Device * pDev )

inlineexplicit

Constructs a new mvIMPACT::acquire::SystemBlueFOX object.

Parameters

[in]

pDev

A pointer to a mvIMPACT::acquire::Device object obtained from a mvIMPACT::acquire::DeviceManager object.

Member Function Documentation

hObj()

HOBJ hObj ( void ) const

inlineinherited

Returns a unique identifier for the component collection referenced by this object.

This handle will always reference an object of type mvIMPACT::acquire::ComponentList.

Returns

A unique identifier for the component referenced by this object.

restoreDefault()

const ComponentCollection & restoreDefault ( void ) const

inlineinherited

Restores the default for every component of this collection.

Calling this function will restore the default value for every component belonging to this collection.

Note

The caller must have the right to modify the component. Otherwise an exception will be thrown.

Returns

A const reference to the component.

Member Data Documentation

acquisitionIdleTimeMax_ms

PropertyI acquisitionIdleTimeMax_ms

inherited

An integer property defining the maximum time in ms the driver waits for new requests being queued until streaming by the device will automatically be stopped.

This property defines the maximum time in milliseconds the driver waits for new mvIMPACT::acquire::Request objects being queued by calling mvIMPACT::acquire::FunctionInterface::imageRequestSingle once the driver will automatically send an acquisition stop command to a streaming device (such as a GigE Vision or USB3 Vision device) when the driver's request queue has run empty (thus the driver has no more buffers to capture data into).

This property will only be taken into account when mvIMPACT::acquire::Device::acquisitionStartStopBehaviour has been set to mvIMPACT::acquire::assbDefault.

Note

This property will not be available for every device. Right now only devices operated through the GenTL driver package will support this feature.

Since

2.4.1

acquisitionMode

PropertyIAcquisitionMode acquisitionMode

inherited

An enumerated integer property defining the acquisition mode of the device.

Valid values for this property are defined by the enumeration mvIMPACT::acquire::TAcquisitionMode.

featurePollingEnable

PropertyIBoolean featurePollingEnable

inherited

An enumerated integer property defining whether features defining a polling time shall be updated automatically or not.

Valid values for this property are defined by the enumeration mvIMPACT::acquire::TBoolean.

See also

mvIMPACT::acquire::SystemSettings::featurePollingInterval_ms

featurePollingInterval_ms

PropertyI featurePollingInterval_ms

inherited

An integer property defining the polling interval in ms the driver waits for each iteration before running through update loop again.

Some features define a so called polling time. This is a recommendation by the device/driver stating that this property might change its value without user interaction act a certain rate (e.g. the device temperature could be one example for a feature with such a behaviour). When mvIMPACT::acquire::SystemSettings::featurePollingEnable is set to mvIMPACT::acquire::bTrue a thread will check every featurePollingInterval_ms if features need to be updated. This will only cause communication with a device for each feature whose polling time has elapsed.

Note

This property will not be available for every device. Right now only devices operated through the GenTL driver package will support this feature.

Since

2.18.3

footerCheckEnable

PropertyIBoolean footerCheckEnable

An enumerated integer property allowing to switch on/off the check of the image footer.

The image footer contains certain additional data as e.g. the exposure time as used by the image sensor. To debug transfer related problems it sometimes can be useful to disable all internal data consistency checks by the driver.

Valid values for this property are defined by the enumeration mvIMPACT::acquire::TBoolean.

footerMode

PropertyIBlueFOXFooterMode footerMode

An enumerated integer property defining the footer mode of the device.

Valid values for this property are defined by the enumeration mvIMPACT::acquire::TBlueFOXFooterMode.

genDCParserEnable

PropertyIBoolean genDCParserEnable

inherited

An enumerated integer property which can be used to enable/disable automatic GenICam™ GenDC Container parsing.

When working with a GenICam™ compliant device, that transmits data using the GenDC format this property can be used to switch on/off the automatic parsing of the received containers. The default value of this property will be mvIMPACT::acquire::bTrue, so a GenDC container will be parsed upon reception and will be reported as the individual components like described here. This results in slightly more CPU time being consumed which sometimes might not be desirable since the GenDC Containers shall be processed later by another entity of the application or shall just be written to some storage location for off-line processing at a later moment in time. When this property is set to mvIMPACT::acquire::bFalse the data buffer will reported as a raw GenDC Container. mvIMPACT::acquire::Request::payloadType will return mvIMPACT::acquire::ptGenDC then and mvIMPACT::acquire::Request::imagePixelFormat will be mvIMPACT::acquire::ibpfRaw then. mvIMPACT::acquire::Request::imageData and mvIMPACT::acquire::Request::imageSize however can directly be fed into any GenDC capable algorithm.

Note

This property will not be available for every device. Only GenICam™ compliant devices will support this feature. More Information about the GenICam™ GenDC format can be found here: https://www.emva.org/standards-technology/genicam/genicam-downloads/.

Valid values for this property are defined by the enumeration mvIMPACT::acquire::TBoolean.

Since

3.2.0

imageProcessingMaximumThreadCount

PropertyI imageProcessingMaximumThreadCount

inherited

An integer property influencing the number of parallel threads used by the internal image processing pipeline.

This property can be used to control the size of the internal thread pool used for image processing tasks. Using a value higher than the number of physical CPU cores usually has a negative impact on the performance. Use with care!

Note

This property will only be available on some platforms. Always check if this property is available before using it!

See also

mvIMPACT::acquire::SystemSettings::imageProcessingOptimization
mvIMPACT::acquire::SystemSettings::imageProcessingMode
Multithreading

Since

2.41.0

imageProcessingMode

PropertyIImageProcessingMode imageProcessingMode

inherited

An enumerated integer property influencing the behaviour of the internal image processing pipeline.

Valid values for this property are defined by the enumeration mvIMPACT::acquire::TImageProcessingMode.

Note

This property will only be available if mvIMPACT::acquire::Device::userControlledImageProcessingEnable has been set to mvIMPACT::acquire::bTrue before the device is opened.

See also

mvIMPACT::acquire::Device::userControlledImageProcessingEnable
mvIMPACT::acquire::Request::hasProcessingBeenSkipped

Since

2.14.0

imageProcessingOptimization

PropertyIImageProcessingOptimization imageProcessingOptimization

inherited

An enumerated integer property influencing the behaviour of the internal image processing algorithms.

Valid values for this property are defined by the enumeration mvIMPACT::acquire::TImageProcessingOptimization.

Since

2.12.2

m_hRoot

HOBJ m_hRoot

protectedinherited

methodPollingInterval_ms

PropertyI methodPollingInterval_ms

inherited

An integer property defining the polling interval in ms the driver waits during each iteration before checking a methods execution state again.

When working with a GenICam™ compliant device, GenICam™ method objects need to be checked for their completion status every now and then. This parameter defines how often this shall be done.

Note

This property will not be available for every device. Right now only devices operated through the GenTL driver package will support this feature.

Since

2.18.3

methodPollingMaxRetryCount

PropertyI methodPollingMaxRetryCount

inherited

An integer property defining the polling interval in ms the driver waits during each iteration before checking a methods execution state again.

When working with a GenICam™ compliant device, GenICam™ method objects need to be checked for their completion status every now and then. This parameter defines how often this shall be done at all. A method is checked for completion methodPollingMaxRetryCount * methodPollingInterval_ms at max. Until then either the device starts to inform the driver that it needs more time OR the execution of the method has completed successfully or an error will be generated.

Note

This property will not be available for every device. Right now only devices operated through the GenTL driver package will support this feature.

Since

2.18.3

powerMode

PropertyIDevicePowerMode powerMode

An enumerated integer property defining the power mode of the device.

Note

This property requires at least firmware version 39! See mvIMPACT::acquire::Device::firmwareVersion to find out which firmware is currently running on the device or use mvIMPACT::acquire::Device::updateFirmware() to update the firmware to the state compiled into the driver.

Do NOT modify this property when images are acquired in parallel. Switching off or on the power for a device that is capturing images at the same time will result in incorrect images! Therefore always make sure to stop image acquisition and clean up BEFORE modifying this property.

Valid values for this property are defined by the enumeration mvIMPACT::acquire::TDevicePowerMode.

requestCount

PropertyI requestCount

inherited

An integer property defining the number of requests allocated by the driver.

Each request object can be used to capture data into. Multiple requests can be processed by a device driver as background tasks.

Setting this property to a value at least allowing a driver to capture data for up to 500ms without user interaction (thus 0.5 times the expected frame rate) is highly recommended. Increasing this value will NOT introduce additional latency to your application. The only drawback will be additional RAM consumption by the driver but applications that do not need to copy the request buffers can even benefit from that as the overall memory fragmentation is likely to go down then. Values smaller than 3 most likely result in undesired behaviour and should be avoided unless absolutely needed.

Note

For performance reasons this value can be increased at any time(only exception: Working with the interface layout mvIMPACT::acquire::dilGenICam while streaming is active) but can only be decreased when no request object is currently locked by the application and no requests has been queued for acquisition. So modifying this value might require the application to call mvIMPACT::acquire::FunctionInterface::imageRequestReset and several calls to mvIMPACT::acquire::Request::unlock before.

There are not too many reasons to modify the default request count suggested by the device driver. Good reasons include:

• a single image is huge compared to the overall system memory(e.g. a single image has 200MB while the system itself only has about 2GB of RAM. Here it might make sense to reduce the number of capture buffers to 1 or 2. Please note that in such a scenario double buffering or live display when one buffer is constantly blocked by the display engine can become a challenge!
• the frame rate is high(larger than 100 frames per second) and no frames shall be lost. Here it might make sense to set the number of capture buffers to something like frame rate divided by 2 to 5 as a rule of thumb.

See also

mvIMPACT::acquire::FunctionInterface::requestCount

Examples

ContinuousCapture.linux.cpp.

statusLEDEnable

PropertyIBoolean statusLEDEnable

An enumerated integer property allowing to switch on/off the status LED of the device.

Note

This feature is currently available for mvBlueFOX-MLC devices only.

Valid values for this property are defined by the enumeration mvIMPACT::acquire::TBoolean.

Since

2.17.0

transferSize

PropertyIBlueFOXTransferSize transferSize

An enumerated integer property defining the block size of the image data blocks transferred from the device.

Valid values for this property are defined by the enumeration mvIMPACT::acquire::TBlueFOXTransferSize.